Untensioned Safety Fencing

Untensioned Safety barrier is widely used in installations such as roadside verges (excluding motorways, dual carriageways and national speed limit highways), slip roads, industrial estates and car parks.

It is designed to both protect areas from damage by passing vehicles and to smoothly re-direct traffic onto a course as near as possible parallel to the barrier.

Specification

• Corrugated mild steel beams formed from 3mm thick material
• Supplied in standard lengths of 3500mm (3200mm effective)
• Standard posts are available as follows:

1) 125mm x 90mm x 5mm x 1200mm “Z” section post (for excavated foundation)

2) 127mm x 76mm RSJ post (Type P224) x 560mm or 760mm c/w base plate for bolting to concrete surface

Each 3.2m length requires 2x posts

Each post requires 1x M16 post bolt to secure to fencing

4x M20 Foundation bolts are required to secure post to ground

4x Lap bolts needed per Fish End

8x Lap bolts required to join each length together (overlay)

NB: DELIVERY TO UK MAINLAND ONLY

Warranty Information

We aim to get most items to you between 3-5 days however some items and larger orders some times take longer. For exact times or to place a next day order ring our Trade Desk 0208 970 7878.

Deliveries apply to mainland England & Wales only. For deliveries elsewhere in the UK, please note delivery costs may be payable. This cost, if applicable, will be agreed before completion of the order and dispatch.